Sociology and Disabilities - 1187 Words

If the technology became available for the deaf to hear completely, would you want your deaf child to have this technology? It is every parent s dream for their child to grow up healthy and happy. There are so many children in the world that do not have the ability to hear, and it is a horrible thing. Many would think it wrong for a parent to not want to give their child the gift of sight. If I had a child that was deaf, I would do everything in my power to help them get their hearing. If the technology was there to fix this disability, why wouldn t anyone want their child to have it? 840 babies are born with a permanent hearing loss every year.(NDCS of UK). This is a horrible number to hear, that so many children will never†¦show more content†¦And according to Anderson Taylor, Gays and lesbians are minority groups in society in that they have been denied equal rights and are singled out for negative treatment by dominant groups. Women have been discriminated again st throughout all of American history. There has been a lot of progress made to help achieve equality, but there is still a glass ceiling holding women down in the workplace, and women are not given the same rights and privileges of men. As a result, there has been a lot of feminist theory trying to achieve equality. Feminism has many meanings, but at the very lest, it refers to beliefs and actions that support justice, fairness, and equity for all women, regardless of their race, age, class, sexual orientation, or other characteristics.(Anderson Taylor p.375). Is one form of oppression more harsh than another form? That all depends on the form of oppression. There has been far more violence in the acts of racism than other forms of oppression, such has sexism and homophobia. However, all forms of oppression are harsh, no matter who it is targeted against. No one wins when all that s being expressed is hate and fear. Not only is there oppression against minority groups, but also from the government. One of these is the oppression ofShow MoreRelatedDisability Term Paper1491 Words   |  6 PagesINTRO TO SOCIOLOGY 1 Running head: DISABILITY TERM PAPER Disability Term Paper By Jose A. Rosario Student # 700316 Central Texas College For Partial Fulfillment of the Requirement for SOCI 1301 Introduction to Sociology Submitted to Dr. Duffy December 7, 2010 INTRO TO SOCIOLOGY 2 INTRODUCTION This paper demonstrates that hitherto sociological analyses of disability have been theoretically and methodologically inadequate. It is written that sociology, in common with the other major contemporaryRead MoreDisability, Social, And Person Centered Perspective1147 Words   |  5 PagesAccording to the Americans With Disabilities Act, an individual with a disability is a person who has a physical or mental impairment that significantly limits one or more major life activities, a person who has a history or record of such an impairment, or a person who is perceived by others as having such an impairment (Anon. 1999). When evaluating disability there are numerous perspectives on it; medical, social, and person centered perspective. Each perspective has its individual ways of addressingRead MoreService Learning At Fraser School988 Words   |  4 PagesFraser school is a preschool setting for infants and toddlers. Besides getting the children kindergarten ready and offering a somewh at typical day of daycare/school, Fraser offers occupational, physical, and speech therapy. Some of the children have disabilities and some do not, Fraser is not discriminatory and they provide care for anyone. Some of the things I did in the classroom were prepare snack and lunch for the children, play games, participate in art projects, music, and reading, and play gamesRead Moreâ€Å"Do not judge me by my successes, judge me by how many times I fell down and got back up again.† –700 Words   |  3 Pagesundergraduate years. Which lead to my falling, but over the years I picked myself back up and showed that I am able to succeed with my degree in Sociology. ***↠- how can I show this without saying I am determined to succeed. Transition: One of the greatest accomplishments I have achieved in Sociology, consisted of my research for the anthropology and sociology conference. Anthropologists and Sociologists of Kentucky; my research was on Slutwalk, which is an international social movement that challengesRead MoreInequality Young People with Disabilities Experience in Leisure Activities1724 Words   |  7 Pagesapproaches can be applied, and in this case psychology and sociology will be explored. More specifically psychology and how body image and cyber bullying can impact leisure participation, along with sociology, which gives an insight into gendered leisure and social class. This essay will explore inequality and will be achieved by critically examining 5 young people with disabilities on a trip to The Melbourne Cup. By applying psychology and sociology disciplines to the hypothetical study can help explainRead MoreDisability in Modern British Society1600 Words   |  7 Pagesinequality or disadvantage encountered by disability in modern British Society. Approximately 8.5 million people in the United Kingdom are registered disabled (Office of National Statistics 2002 cited in Giddens 2006:287). Definitions of disability is important to the way in which its nature is investigated and also to its extent in society. This essay will illustrate the broad definitions of disability and the dissimilarity between disability and impairment. It will also discuss howRead MorePersonal Statement : Social Work741 Words   |  3 PagesPsychopathology, Sociology of the Family, and Child and Adolescent Development. I have also become a tutor and mentor in a mentoring program (PALS) at Lowell High School where I have had the opportunity to interact more with youth and get a different perspective on youth major social problems, such as substance abuse, violence in school, education disparity, dysfunctional families, peer pressure, etc I have also completed a Disability Studies minor with a concentration in Developmental Disabilities that gaveRead MoreThe Social Construction Of Deviance And Eugenics1542 Words   |  7 Pages GEISY COBAS SOCIOLOGY 443 ANALYSIS PAPER THE SOCIAL CONSTRUCTION OF DEVIANCE AND EUGENICS â€Æ' ABSTRACT In this paper I will be analyzing the social construct of deviance and the topic of Eugenics theoretically, and how this practice transitioned from being deviant back in the early 20th century to a modern technology that can be used to help parents have healthy children. I will use different scholarly sources to compare and review different positions in the theories used as they relate toRead MoreSociology and Healthcare Essays1578 Words   |  7 PagesSociology and Healthcare Health-care is a sociological institution within the American Culture. Health-care has many different aspects that pertain to patients, care givers and governmental approach to supply healthcare to all citizens. Sociology is the â€Å"scientific study of social behavior and human groups.† (Schaefer, 2009) Sociology plays a large role in how Americans look at our health-care systems and approach health and illness in one’s own life. Health-care has many different definitionsRead MoreHistory Of Medicine And Public Health Essay1548 Words   |  7 Pagesprofessor at the University of Canberra, Australia. She received bachelor degrees in sociology and anthropology at the Australian National University, as well as a Masters in Public Health and a doctorate from the University of Sydney. She has written 14 books and 130 academic journals on the topics of medicine and public health from a sociological perspective. She is currently researching topics such as sociology in a digital culture and digital health analysis (Lupton, 2012). II. Research Questions

Persuasive Essay Unpaid Internships - 1392 Words

One interesting and controversial topic nowadays is internships. Several people argue whether they are fair or not and there is a great deal of different arguments and points of view. Evidence indicates that internships have more flaws than virtues, and these flaws determine the arguments that demonstrate that they are not fair whatsoever. There is a significant problem: countless students cannot afford this job option, creating an unfair disadvantage for those scholars with financial difficulties. The number of undergraduates in need of an income source to pay for their living expenses and their college tuition is constantly increasing. In brief, the more difficulties the students have financially, the less positions they can afford to apply for. In contrast, scholars with financial commodities can access a vast number of options and find the best fitted placement to fulfill their interests. Furthermore, unpaid internships are merely a simulation of a real job, losing the seriousnes s and responsibility the last one usually possesses. In some cases, employers utilize internships as an opportunity to exploit a free labor source instead of teaching the basics of the professional world to his or her interns. These drawbacks are making impossible for apprentices to acquire full benefits from this opportunity, turning the position in only a way to increase their resume. The lack of rights and voice for trainees is another major flaw. Students do not have proper protection againstShow MoreRelated65 Successful Harvard Business School Application Essays 2nd Edition 147256 Words   |  190 PagesGRIFFIN NEW YORK 65 SUCCESSFUL HARVARD BUSINESS SCHOOL APPLICATION ESSAYS, SECOND EDITION. Copyright  © 2009 byThe Harbus News Corporation. All rights reserved. Printed in the United States of America. For-information, address St. Martins Press, 175 Fifth Avenue, New York, N.Y. 10010. www.stmartins.com Library of Congress Cataloging...in..Publication Data 65 successful Harvard Business -School application essays : with analysis by the staff of The Harbus, the Harvard Business School newspaperRead MoreStephen P. Robbins Timothy A. Judge (2011) Organizational Behaviour 15th Edition New Jersey: Prentice Hall393164 Words   |  1573 PagesCommunication 341 †¢ Nonverbal Communication 341 Organizational Communication 342 Formal Small-Group Networks 343 †¢ The Grapevine 343 †¢ Electronic Communications 345 †¢ Managing Information 349 Choice of Communication Channel 350 xiv CONTENTS Persuasive Communications 351 Automatic and Controlled Processing 351 †¢ Interest Level 352 †¢ Prior Knowledge 352 †¢ Personality 352 †¢ Message Characteristics 352 Barriers to Effective Communication 353 Filtering 353 †¢ Selective Perception 353 †¢ InformationRead MoreLibrary Management204752 Words   |  820 Pagesfactors that make it more necessary than ever to systematically plan and develop library and information services? In thinking about the assignment, and before even reading articles and treatises on change, what are your initial reactions? Present a persuasive argument to the group as you break out into discussions on this theme. Such a dynamic environment provides new challenges and opportunities to revitalize and redefine organizations as well as reinvent information sources and services for both growth

The Canon Free Essays

4. Define the â€Å"canon† and describe the basic criteria and chronology behind the formation of the New Testament canon. What evidence exists in this area? Why did early Christians feel a need to establish an authoritative list? Which elements in the criteria are the most and least important? State your reasons for choosing these elements. We will write a custom essay sample on The Canon or any similar topic only for you Order Now How would you respond if someone claimed that the canon of the Bible should still be open? a. Define the â€Å"canon† and describe the basic criteria and chronology behind the formation of the New Testament canon. What evidence exists in this area? The word â€Å"canon† is a Semitic loanword that initially meant â€Å"reed† but came to mean â€Å"measuring reed and hence rule or standard or norm† (Carson, 726). In the history of Christianity the word canon was first used to designate doctrines which established the basic beliefs and practices of the church (Lea, 70). In our reading in Carson/Moo and Lea/Black, three elements of criteria’s are used to show that certain books belonged in the canon known as â€Å"orthodoxy, apostolicity, and universality† (Lea, 72). Lea/Black states, that the gages for defining canonicity are difficult to determine, but the most vital criterion for determining canonicity is inspiration (Lea, 71). The first basic criteria involved â€Å"the rule of faith† (Carson, 736, Lea 71), which meant that the teaching of the book followed the beliefs the church honors as acceptable and correct, (Lea 71). The second basic criteria entail of the demonstration of apostolicity, which â€Å"required authorship by an apostle or by the companion of an apostle† ( Lea, 71), the final basic criteria is universal acceptance meaning used and accepted by churches everywhere (Carson, 737). . What evidence exists in this area? The foundations that the Church uses to base canonicity upon are the use of the works by early Christian writers (Lea and Black, 73). The regularity of references from various books informs modern students of how the books were viewed in ancient times (Carson and Moo, 733). Another basis affecting the results of the canonical question are the early lists put forth of books deemed inspired (Lea and Black, 73). Lastly, the addition of manuscripts in early codices indicates the opinion of the book by the binder (Lea and Black, 73). c. Why did early Christians feel a need to establish an authoritative list? There is not a definite cause why early Christians felt a need to institute an authoritative list, some of the reasons for the list could have included persecution, distance from the historical Jesus, the pressure of Montanism, the rise of Gnosticism and other movements with scriptures to be rejected (Carson, 736). With this being the case I feel that the formation of an authoritative list by early Christians was deemed necessary to contest the teachings of heretics that were appearing in the Church. Through the insertion of books that possessed non-Christian ideals or the rejection of books accepted as inspired, false and incomplete teaching ran the risk of corrupting orthodox doctrine d. Which elements in the criteria are the most and least important? I believe the most important element of canonicity is inspiration and that God chooses to work in a person’s lives in other ways. Someone may say inspiration, I cannot see why man would try to limit God’s ability to move and I believe that our minds cannot even begin to grasp the depth, width or even an ounce of God’s wisdom or knowledge or even half of what he is able to do, when looking at creation and the vastness of the universe it is mind blowing to me. I also believe that â€Å"Apostolicity† is also an important criterion, being that Matthew, John and Peter, were members of the twelve along with Paul, commissioned by Christ, along with their associates such as Mark who with Paul . The least important criteria to me is universality based on Carson’s assessment of it being â€Å"scarcely less important† (Carson, 737). e. How would you respond if someone claimed that the canon of the Bible should still be open? In most modern churches today, the Canons are considered to be â€Å"closed†, meaning that God does not add to or take away from the writings of the bible, and instead chooses to work in a person’s lives in other ways. We all recognize that the New Testament canon contains the authorative record of Jesus life and the interpretation of its significance (Lea, 74-75), with that reason the canon should not still be open. But we also must keep in mind that God who is sovereign and can choose to move however he desires and many times I feel that we try to put human reasoning in areas that our mind cannot even perceive, for as stated in Isaiah 55:8 God says: â€Å"For my thoughts are not your thoughts, neither are your ways my ways, saith the LORD. † 4. Explain how we have approximated the dates of Jesus’ birth and death as well as the length of his ministry. List primary and secondary sources describing his life. Which of these sources is the most important? How important is accurate historical information in providing a foundation for accepting and believing the gospel message? a. Explain how we have approximated the dates of Jesus’ birth and death as well as the length of his ministry. We have an awareness of the date of Jesus birth because of three main events. A period before the death of Herod the Great, during the time of a census ordered by Augusts, and when there was a bright start in the sky leading men from the east (Lea, 95). Ancient records designate that Herod possibly died around March 4B. C. this means that Christ was born before that (Lea, 95). Quirinius was governor of Syria during the officiating of the census under Augustus. (Lea, 95). The registration for the census could have happened possibly in 8 B. B. and could have taken years to execute. This places the birth of Jesus anywhere from 6 to 5 B. C. (Lea, 96) Jesus’ death is very reliant on the Gospel of John. John associates Jesus’ death to a system of time based on the ministry of John the Baptist, who preceded Christ, which took place on the 15th year of Tiberius reign. Lea, 96) John mentions that the construction of the temple had taken 46 years in the beginning of Jesus’ ministry. (Lea, 97). If you evaluate both of these statements and add the approximate three years of Jesus’ ministry they both arrive at a death for Jesus in A. D. 29 or 30 (Lea, 97). The approximate length for the ministry of Jesus is arrived at using the number of Passovers that Jesus attended. (Lea, 96) b. Lis t primary and secondary sources describing his life. Which of these sources is the most important? The gospel of Matthew and Luke are the prime sources of the life of Jesus. The birth of Christ is most fully covered by Matthew and Luke, (Lea, 97). Matthew and Luke also present the most information about the life of Jesus before his ministry, or the â€Å"Period of â€Å"Preparation. † (Lea, 98) John is the only Gospel that relates Jesus Judean ministry. The rest of Jesus ministry is recorded in the entire Gospel, which makes Mark and John the secondary complete record of the life of Jesus. c. How important is accurate historical information in providing a foundation for accepting and believing the gospel message? The Gospel message comprises substantial facts about the life of Jesus. Important academic attention has been devoted to the historical examination of the New Testament, explicitly with respect to establishing it as a reliable historical document. The vast amount of material, in the form of manuscripts, archaeology, and authorial phenomenon delivers an priceless glance into the depths of events surrounding the historicity as well as the development of the New Testament. For many people without establishing historical believability for the New Testament, there would be no grounds to suggest any sort of belief in it as a reliable source. But for me even if the dates cannot be exactly known for the Christian, it should not affect the belief in the life of Christ. The great men of the Bible prophesied accurately that highly educated men and women who scoff at God and His revealed Word would dominate our world. Although men have sneered at God in every generation beginning with Adam, ours was to be the worst. The Apostle Paul wrote: Because that, when they knew God, they glorified him not as God, neither were thankful; but became vain in their imaginations, and their foolish heart was darkened. Professing themselves to be wise, they became fools. And even as they did not like to retain God in their knowledge, God gave them over to a reprobate mind, to do those things which are not convenient (Romans 1:21-22, 28). Although Paul is speaking specifically about the earliest men, we have not changed for the better; we have grown worse. Since the 17th and 18th centuries, men have produced an amazing fund of knowledge in the industrial and scientific areas. Yet pursuing knowledge about God has been left out. We have several sources that provides foundations for accepting and believing the gospel message. Carson, D. A. and Douglas J. Moo. An Introduction to the New Testament. 2ded. Grand Rapids, Michigan: Zondervan, 2005. Lea, Thomas D. and David Alan Black. The New Testament: Its Background and Message. 2ded. Nashville, Tennessee: Broadman and Holman Publishers, 2003 Carson, D. A. and Douglas J. Moo. An Introduction to the New Testament. 2ded. Grand Rapids, Michigan: Zondervan, 2005. Lea, Thomas D. and David Alan Black. The New Testament: Its Background and Message. 2ded. Nashville, Tennessee: Broadman and Holman Publishers, 2003 How to cite The Canon, Papers

The Marketing Research Planning Process free essay sample

Introduction In this paper we will discuss the process used in marketing research planning. There are eight steps to take in this process, identifying the problem, creation of the research design, choosing the method of research, selection of the sampling procedure, collection of data, analysis of the data, writing and presenting the report, and follow up. These steps will insure that the data collected answered the right problem and is useful to the client. Step 1: Identifying the Problem Identifying the problem is the first step in the marketing research planning process. You must find out what kind of data you are looking for. There are a few different types of data to be collected such as descriptive studies or causal studies. Descriptive is the kind of study that asks who what where when and how. The causal studies ask us more they why, they follow the line of thought that if one variable changes then the other will change in a consistent way. We will write a custom essay sample on The Marketing Research Planning Process or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Step 2: Research Design Creation of the research design is a plan of attack for accomplishing our research objectives or we can call it a hypothesis. The book describes a hypothesis as a conjectural statement about a relationship between two or more variables that can be tested with empirical data. Step 3: Method of Research Choosing the method of research is to find out what kind of means we will use to gather data. The three basic methods are survey, observation and experiment. A survey is a where the participant is asked a number of questions, such as a mail survey. Observation is monitoring without direct interaction, such as watching peoples habits at the mall. Experiments are types of research that are defined by the experimenter changing one or more ariables. Step 4: Sampling Procedure Selection of the sampling procedure is picking out a group of people to research. You must define the population, this should include all the people whose opinions, behaviors, preferences, attitudes and such which will gain information that will help us answer the research problem. The next step would be to fine out if you will use a probabil ity or non probability sample. Step 5: Collecting Data Collection of data can be anything from counting boxes on the shelf of your local grocery store to firms doing interview surveys and test/focus groups. This is the gathering of the info for our reports. You must at all cost make sure that each and every kind of collecting is consistent and monitored for errors. Primary Research Primary research is done by gathering information ones self or hiring a firm to gather it for you. This is the kind of information that is gathered to answer the specific question that was asked by management, or project leader. An example of primary research is when an internet survey is presented to various people in the focused area of the market in which we are studying. I do surveys for home depot after each time I buy stuff from them. Secondary Research Secondary research is data that was all ready gathered. It could be information that was gathered by a local government department, a national department, or any in between. This info could also come from another source like an older study, a study conducted by a school or university. This kind of data can both, help or hurt the current project. Qualitative Research The kind of research that is not subject to quantifying and can not be counted of measured is â€Å"Qualitative research†. This kind of research gets down to the feelings of people. The question of â€Å"why? Is sought after here. The information is usually gathered by a highly trained interviewer, and used on a smaller group of people. Using a smaller group of people can dramatically reduce the cost of the research. This kind of research can find out the motivations of the participants of the studies. A great example of qualitative research would be when you are asked about why you voted for a particular person. Quantitative Research Quantitative research is research that uses mathematical analysis. It looks at the numbers and measures them to various variables. This kind of research is generally done with a very large sample size, asking the same questions to each person. Then measuring the results. The type of information that is gathered here will not be very probing with no open ended questions. Most questions will be a yes or no or multiple choices. One of the last examples of this kind of research that I participated in was when I rated this class. Step 6: Analyzing the Data Analysis of the data is where you break down the collected data and try to find links and of patterns in it to help answer the research problem that we started with. Step 7: Presenting the Report One of the most important and most often messed up is, writing and presenting the report. The person heading up the research will have to make sure that the information and recommendation is both credible and justified by the data, if he wants the recommendation to be followed. The report can be presented in many different ways such as a printed report, digital report, a presentation, or even a combination of them all. The recommendation that you make should reflect the knowledge gathered from the data collected. You must also state why you recommended the course of action. Step 8: Following Up Follow up with the firm, make sure that the research is being used and interpreted correctly. A good way make sure that the information is going to be used is to make it so each department don’t conflict with the others. Also doing these kinds of follow up can let management know that you care about the work that was done for the company. Making it a higher chance that they will use you next time that there is research to be done. Conclusion In conclusion there are 8 steps to planning your next marketing research process. You will have to take into consideration at the things we discussed such as the 8 steps and the types of data to be collected. Make sure the gathering process is consistent and complete. Let the report speck the same. Reference McDaniel, C. , Gates, R. (2005). Marketing Research Essentials. Hoboken, NJ: John Wiley Sons, Inc. Marketing Research Process: An Overview. (n. d) Retrieved on June 20, 2009, from http://www. polarismr. com/edctr_overview. html Marketing Research. (n. d) Retrieved on June 20, 2009, from http://www. quickmba. com/marketing/research/

A Female for the First Essay Essay Example

A Female for the First Essay Essay Example A Female for the First Essay Essay A Female for the First Essay Essay Although a really well-thought-of female journalist. Susan Jacoby was labeled as a â€Å"First Amendment junkie† by many other adult females for her personal positions refering the censoring of erotica in society. Ultimately. she believed that censoring of any sort against erotica was incorrect. Feminists were infuriated that another female acknowledged pornography’s right to be. Susan Jacoby did non needfully hold with erotica. but she felt that its rights guaranteed under the First Amendment should non be excluded. There is no cosmopolitan definition for the reading of the First Amendment in which every individual American can hold upon. It was created with the basic apprehension that everyone portion the same rights. Trying to appeal to womens rightists that erotica is protected under the First Amendment is about an impossibleness. Susan Jacoby refers to the womens rightists as a societal group entity that wants to utilize their powers of the province to seek and alter what has non been able to be changed. She believes womens rightists lack any existent rational ground for the censoring of erotica and that it is incorrect merely because they say it is. In the eyes of womens rightists. all types of erotica will doubtless take to force. devastation. and the immoral ruin of world. as we know it. Obviously. womens rightists understand the point of views for all adult females and cognize precisely what is good and what is non for them. Feminists believe themselves to be an below the belt treated minority in society. They have banned together to support other adult females across the state from going victims of sexual lewdnesss and disgusting coarseness. It is more of import that the freedom of address granted to pornography be censored more than the freedom of address granted to other thoughts such as sapphism or abortion. Truly. it is diverting to see how womens rightists have assigned a degree of tolerance towards different thoughts and that erotica is at the top of their list. The single-mindedness and tunnel vision of womens rightists for the attack on erotica causes them to wholly ignore other thoughts that can besides be constituted as incorrect and consequently be denied the FirstAmendment besides. Susan Jacoby did an first-class occupation of remaining impersonal in her positions of back uping erotica and chiefly focused on showing the First Amendment rights. Pornography is a difficult topic to support and edify people about because the industry is built around the controversial and forbidden thoughts of sex. Although everyone is making it. non everyone is freely speaking about it. Besides entree to erotica is regulated forestalling under aged kids from sing it ; hence. giving it more of an feeling that it is incorrect. Despite all the negative deductions. Susan Jacoby understands that if society denies pornography’s rights under the First Amendment. so society must in bend deny every other thought their rights as good. The very foundation of the First Amendment allowing freedom of address and imperativeness to everyone should non hold loopholes or freedoms for anything merely because one type of societal group disagrees with the positions of another. Plants Cited: Jacoby. Susan. â€Å"First Amendment Junkie. † Critical Thinking. Barnet. Sylvan and Hugo Bedaw. Boston: Bedford St. Martin. 2005. 41-43.

Informative Speech Outline Global Warming Essay Example

Informative Speech Outline Global Warming Essay Example Informative Speech Outline Global Warming Essay Informative Speech Outline Global Warming Essay Essay Topic: Informative Title: Global Warming Specific Purpose: To inform the audience about three issues of how global warming is affecting our weather, animals, and our future. Thesis: According to National Geographic Average temperatures have climbed 1.4 degrees Fahrenheit around the world since 1880 and by 2050, rising temperatures could send more than a million of Earths land-dwelling plants and animals down the road to extinction. Introduction I. Open with Impact: Is the climate warming? The impacts of global warming will be felt across the globe. A. The effect of global warming driving animals into extinction B. A rise in the amount of extreme weather disasters C. The change it will cause to the earth in the future II. Connect with the Audience: Do you think Global Warming poses a threat to you? According to National Geographic Average temperatures have climbed 1.4 degrees Fahrenheit around the world since 1880 and by 2050, rising temperatures could send more than a million of Earths land-dwelling plants and animals down the road to extinction. Transition: Lets begin with my first point Body Main point: How the effects of Global Warming Will drive our animals into extinction, increase the amount of extreme weather disasters, and the change it will cause to our future. A. Global Warming Fast Facts (National Geographic News, June 2007) Average temperatures have climbed 1. 4 degrees Fahrenheit around the world since 1880. Arctic ice is rapidly disappearing, and the region may have its if rest completely ice-free summer by 2040 or earlier. Wildfires, heat waves, and strong tropical storms, are also attributed in part to climate change. In July of 2006 heat waves contributed to the deaths of at least 225 people in North America. Warmer temperatures could increase the probability of drought Warmer temperatures increase the energy of the climatic system and can lead to heavier rainfall in some areas. Signpost and transition: Now that you know what effects Global Warming is having on our weather will be telling you about how it will affect our animals. Main Point: The reason for animal extinction is because our animals cant adapt to rising climate changes. A. These are some of the facts (NRC. Org, 2008) 1. The predicted range Of climate change by 2050 will place 15 to 35 percent of the 03 species studied at risk of extinction. 2. Increasing global temperatures are expected to disrupt ecosystems, pushing to extinction those species that cannot adapt. 3. Some polar bears are drowning because they have to swim longer distances to reach ice floes. B. Global Warming will drive our animals into extinction Signpost and transition: The final aspect of Global Warming that I will be liking about is the effect it will have on our future. Main Point: Our future is in for a drastic change from what we call normal today. A. Rising sea levels could flood many South Seas islands and swamp large parts of Southeast Asia. B. Researchers predict the earths temperature may rise to an additional 5 or up to a drastic 12 degrees Fahrenheit. C. Warmer water in the oceans pumps more energy into tropical storms, making them stronger and potentially more destructive. D. Greater evaporation, particularly during summer and fall, could exacerbate drought conditions and increase the risk of wildfires. Transition: Lets review what we learned today about Global Warming Conclusion: Summarize: The world is in store for a major change. Rising temperatures are having major effects in several different areas and aspects of the world. An increase in more powerful tropical storms, wildfires, and rising water levels will change the world that we live in today. A. We should familiarize ourselves with what the effects of our everyday lives are having on our future. B. Are you contributing to the destruction of our future? C. Life as you know it will never be the same Close with impact: No matter how much you try to ignore Global Warming he earth as we know it is in a lot of trouble.

Death penalty Research Paper Example | Topics and Well Written Essays - 750 words

Death penalty - Research Paper Example Marzili observes that Criminologists, Lawyers and other practitioners have over the years tried to analyze and study the rate at which murder declined after murderers are executed but there have been no authoritative conclusive results. In 1973 however, Isaac Ehrilch research carried in the United Sates showed that for every one inmate executed, seven lives were spared as potential murderers were prevented from committing such crimes. The results were similarly observed by his disciples. For those who support capital punishment, the likelihood of tangible results not being felt, they argue, is as a result of lack of swiftness in executing the convicted culprits. For this MSU authoritatively asserts that: ‘’The fact that some states or countries which do not use the death penalty have lower murder rates than jurisdictions which do is not evidence of the failure of deterrence. States with high murder rates would have even higher rates if they did use the death penalty’. Indeed, others have supported the argument citing that it is preventive in the sense that people in general fear death more so death that is planned and decided by the courts. Even more interestingly is the fact that death penalty against a murderer would prevent him from committing any other offence ever and thus seen as a permanent deterrent measure. Further, these executions take approximately forty days before they are conducted. But one issue that begs the question why should the convicted be made to wait on death row? Why long wait in death row While the death penalty is seen by many as just, some people have argued that often times those convicted of murder and sentenced to death are put on wait for too long. This is more compounded by the cost incurred as any investigation relating to death penalty usually costs three times more than a non-death case (Marzili 50). When one is convicted and sentenced to death, they are usually put on death row during which time the state expends housing, health-care and food costs on them. However, some of the reasons which have been cited for long death row are many and how that affects the cases have some moral standing (Marzili, 58). First, if the convict becomes sick or ill, then he has to be treated before the execution takes place. Olando (2009) provides a case where in 2003 about $121,025 was spent on a life saving dialysis for a condemned killer who had been subjected to death row for six years. This was the case involving Horacio Alberto Reyes who was c onvicted of murdering Maria Zetina. He wanted a kidney transplant and argued that this would save tax payers in the long run (Olarndo 8). Secondly, it allows for arbitrary search of any pending justice. Reverend Jesse Jackson had once argued that death sentence is basically an arbitrary punishment. According to him, it does not entail objective templates or guidelines when it should be sought or executed. Therefore, the lack of the objectivity leading to discriminatory practices puts it that whoever is sentenced is allowed humble time to seek redress through an appeal. He further argues that many Americans support of death penalty is anchored on individual propensity to violence, an individual’s criminal history among other factors; parameters

Strategic management. Current strategic structure for Qantas airline Essay

Strategic management. Current strategic structure for Qantas airline - Essay Example The company is an award winner for being in the top 6 airlines in the world for the past 5 consecutive years.The in flight entertainment and wine list have also won it numerous awards.Qantas Chief Executive Officer Alan Joyce has outstanding leadership experience in airlines and,therefore,understands the operation relatively well. Qantas has a strong governance structure and board which includes individuals with a wide range of experiences. The airline also operates a range of businesses that include baggage handling, check in and passenger lounges. It also operates Qantas catering that runs two businesses: Snap Fresh, a big manufacturer of frozen meats and other, different meal components; Q catering this is premium catering businesses. Q catering operates 7 centers across Australia and also sells to other airlines. It also supplies about four million bottles of the country’s wine. The airline has interests in the Singapore firm Holiday Tours and Travel. The airline merged wi th Jet set in July 2008, to create Jet set Travel World, where Qantas Airline owns 58 percent. Qantas program, frequent flyer, is another business with 15 million members. The program supplied over 450000 award seats on the program partner airlines. Qantas engineering runs a large maintenance and repair business that has earned the tag of being the best for their safety records. The airline also operates a holiday travel business. Qantas airline is a well branded airline as the spirit of Australia, and it has a number of outstanding accepted TV advertisements on this theme. Domestically, it is a well supported full service airline and in the Global travel as the Australian airline. The airline has still managed to be among the world’s most profitable airlines. However, in mid 2009 the profits became predicted to fall by 100 million. In response to this financial crisis Qantas airline has grounded decided to ground 10 aircraft, and has also informed Boeing that it will defer i ts orders for the 737-14 version of the aircraft and also a delay for the delivery of the new 15, 787 Dream liners. The decisions taken by the outgoing CEO George Dixon, to save money, has affected the airline both negatively and positively. He improved the bottom line but destroyed the operations of the Qantas engineers and the baggage handlers. British airways and Qantas airline underwent a number of merger talks in the late 2008. The benefits of this merger was the economies of scale present in the buying and flying of the aircraft, joint frequent flyer scheme and also, the joint IT scheme. However, problems in negotiations proved that the merger would not proceed, and the Qantas executives claimed to be looking for mergers with other airlines. The downsizing of the airline led to a number of strikes by the airline engineers and the baggage handlers. The CEO decision to outsource about 7000 of the airline employees became unwelcome (Hanson, 2010). This number of strikes have cost the airline lost revenue as more than 300 flights had to be cancelled during the period of the standoff between the management unions and the management board. During this period, Qantas airline lost Air New Zealand, which transitioned out of its maintenance contract with the airline, and opted to use the Cathay Pacific maintenance people. The strikes have proven fact that the Qantas airline workforce got well unionized and aggressive in the defense of their working conditions. Corporate and Business Strategy using the Balanced Score Board I have recommended the intensive strategy that includes; market penetration, market development and market development. Due to the nature of the industry the strategy is best for the company to survive. Market penetration should be implemented when the present market becomes not saturated, the rate of the current customers can be increased, and sales in the industry are increasing. In market penetration, the number of the sales person gets increa sed, increasing

What is extreme poverty To what degree would you describe meeting Goal Essay

What is extreme poverty To what degree would you describe meeting Goal 1 Target 1 of the Millennium Development Goal as a success - Essay Example With it there has been a considerable drop in incomes which resulted in additional 50 million people being left in extreme poverty in 2009. Based on the projections the global poverty which is measured at $ 1.25 a day will fall to 15 percent by 2015 and it will leave 918 million people below the poverty line. Though over the past three decades poverty has declined rapidly, but human society still faces complex and urgent challenges. Worldwide more than 1 billion people live in a state of destitution. With rise in social exclusion and inequality the problem of extreme poverty is rising. This report will take a look at the extreme poverty and the various goals regarding it. In 2013 the Board of Governors of World Bank has endorsed two new goals. First is that the World Bank Group will commit its energy into bringing an effective end to the extreme poverty by 2030. This means that that they have to reduce it to no more than 3 percent the fraction of the population of the world who are living on less than $ 1.25 percent per day. The second goal is to ensure that the benefits of prosperity will be shared by promoting income growth of the bottom 40 percent of the people. The World Bank group aim at achieving both the goal in a sustainable manner and hence help secure the long term future of the planet and its resources (Và ¶rà ¶smarty, and et.al. 2010, p. 173). The World Bank originally defined extreme poverty as individuals who are living on the equivalent of less than $ 1 per day. In 2008 it was then updated to $ 1.25 per day. In 1990 the number of people living in extreme poverty was estimated at 1.2 billion. According to World Bank the percentage of people living in extreme poverty globally will fall to no more than 3 percent by 2030 (United Nations, 2010, p. 351). In 1980s it was common for the nations to use their general economic surveys and national income accounting for identifying a poverty line (Rogers, Jalal

Heat Exchange In Refrigerator System

Heat Exchange In Refrigerator System INTRODUCTION The intend heat exchangers, such as condensers and evaporators, very much influences energy effectiveness of the refrigeration system. A properly designed heat exchanger will not simply helps decrease energy consumption but in addition reduce cost and increase storage volume. Recovering energy efficiency and reducing cost essentially poses a multi objective optimization problem. As these objectives are differing, no single design will satisfy both at the same time. Generally, heat exchanger optimization can be classified into system-level optimization and component-level optimization as in system-level optimization. a complete system is analyzed while component level analysis is performed by separating the heat exchanger from the system by providing proper junction boundary conditions. Previously it has been used design optimization methods, which are merely thermodynamic in nature, for example entropy generation minimization (EGM) The main concept of EGM is that if entropy, which measures the irreversibility of the system and minimized followed by systems performance improvement the technique is used to optimize heat-exchanger list between the condenser and evaporator. The resultant system from the analysis is the good   energy efficient, but   may not be good for an economic point of view a new approach was projected which integrates economics with thermodynamic optimization, which means   the ‘‘thermo-economics approach. Th ermo-economics blends two very dissimilar fields thermodynamics and economics, making it predominantly suitable to design thermal systems with efficiency and capital cost. (Gholap et.,2007 ) . Condensation heat transfer, equally inside and outside horizontal tubes, plays a main role in refrigeration the science of condensation heat transfer has been adopted a substitute working fluids and new improved surfaces for heat exchangers. (Cavallini, A etal.,2003) Literature review Literature review and discussion for heat exchange in refrigerator system There are many   publications focus on heat exchangers in an refrigerator system   has have quite a lot of design variables such as geometry, surface finish, Material In this work. These variables are inhibited by various reasons such as manufacturing capability and space limitation. Heat exchanger has many variables, e.g. number of rows, width, fin density, tube diameter, tube spacing, fin spacing, etc. Dependent variables are the characteristics of the design household refrigerators, energy consumption, cost, and internal volume can serve as independent variables. (Gholap,,2007 ) describe heat optimizing system in an refrigerator system the study was proposed considering overall energy-consumption and heat-exchanger with low cost material which was multi-objective optimization problem. Thus he tried to calculated over all energy-consumption   by adding the energies consumed by the compressor, fan motors, and defrost heater for a 24 hours period and heat-exchanger   costs of material were calculated by means of   individual weight of the coil multiplied through the rate per unit and weight of the correspond metal in the market. His researched   was focus on various kinds of design of the condenser for heat optimizing, most household refrigerators has   wire-on-tube design for the condenser and finned tube Design for the evaporator which is used extensively according to research heat exchanger is divided into along length, height and depth each of element has refrigerant and air steam. However, heat optimizing system does not show much development Thus, The designer can prefer a resolution based on the manufacturers strategic direction regarding cost and the Energy-consumption requirement. A research on wire on tube condenser by (Lee, TH.,2001) observes the correlation on the airside heat transfer coefficient of wire-on-tube type heat exchangers by   using single layer tube   rather than using bundles of tubes. The improved correlations were based on Zhukauskas correlation which discussed via the numerical analysis. Thus Concluding the ratio of Zhukauskas correlation for a single cylinder to the heat transfer coefficient across to the air flow in the wire-on-tube type heat exchanger is constant and the heat transfer parallel to the air flow in the wire-on-tube type heat exchanger. Hence, Zhukauskas correlation has a more accurate prediction result compared to the existing cases. Another research was proposed by (Yang, C, 2005) presenting the numerical results of the consequence of dissimilar parameters on the performance of capillary tube-suction line heat exchangers (CT-SLHX), together with condensing and evaporating temperatures, degrees of sub cooling and superheat, tube diameter, tube length, and refrigerant flow inlet quality. The effects of different geometric and operation circumstances on the capillary tube performance and investigated that the best design present capillary tube-suction line heat exchanger exists about 3 K of sub cooling and 1.4-1.6 m of the heat exchanger length. Further found that R-134a performs better in terms of heat transfer rate and evaporator capacity than R-600a and heat transfer rate from the capillary tube to the suction line decreases by about 8-10% when non-adiabatic inlet arrangement is used compared with adiabatic Wire-on-tube Design The most extensively used condenser in refrigerant system since many years is wire-on-tube design used for the condenser and finned tube design intended for the evaporator. Wire-on-tube type heat exchanges consists of tube bundles within which a heat transfer medium such as refrigerant is strained to flow, whereas a second heat transfer fluid like air is concentrating transversely through tubes. As the airside thermal resistance of this heat exchanger is much advanced than that of refrigerant side, improved surfaces such as wires straight welded on the sequence of tubes are engaged to successfully reduce the resistance as in the other finned tube heat exchangers. Even though these are widely used in home refrigerator for low cost and simple making, the general design data and correlation for the airside heat transfer be not easily obtainable. This makes additional studies have been focused on the research area for cycle matching and frosting. The airside heat transfer coefficient of heat exchanger will be able to calculated using the following two methods: The heat transfer coefficient of tubes and wires can be obtained, respectively, by multiplying Zhukauskas correlation by correction factor Results is formulated directly by performing the heat transfer experiment on wire-on-tube heat exchanger. (Lee,TH.,2001) Capillary Tube-suction Line Heat Exchange Optimizing a capillary tube-suction line heat exchanger is beneficial designers for vapour compression refrigeration systems and better enhancement of the system performance. A capillary tube is extensively used in household refrigerators owing to its low cost and effortlessness. It improves the system capability by minimizing the evaporators inlet-enthalpy. In addition it act as a shield for the compressor and increases the inlet temperature. (Gholap 2007) .The capillary tube and the suction line figure a counter-flow heat exchanger. Refrigerant vapour is condensed as of the evaporator to the condenser in process and is packed together in the condenser throughout the process. A non-adiabatic throttling procedure is implicated throughout process where heat is transferred from the capillary tube to the suction line throughout process, while at the same time heat is separate from the evaporator for the duration of process The heat transfer from the capillary tube to the suction line over and over again leads to the upgrading in the thermodynamic efficiency of the system owing to the condensed refrigerant quality and towards the inside of the evaporator. Moreover, the transfer of heat to the suction line ensures the refrigerant vapour enters the compressor by this means of eliminating suction line sweating and preventing slugging of the compressor. The capillary tube has been extensively investigated even though a few numerical models of t he non-adiabatic capillary tubes are existing but there require understanding on some flow phenomena within a tube, such as the reverse heat transfer, the re-condensation, and the chocked flow of the condenser in a refrigeration system. Some phenomena possibly will cause unstable flow in the capillaries the two-phase flow heat transfer coefficient has commonly been believed to be infinite. This hypothesis may be unsuitable in situations, where re-condensation or overturn heat transfer possibly will occur from the suction line to the capillary tube under distant operating conditions. This precise hypothesis of infinite heat transfer has been undisturbed in the present model by using suitable two-phase heat transfer correlations to reproduce the actual flow performance inside the capillary tubes. As a result a numerical investigation of refrigerant flow due to non-adiabatic capillary tubes through modifying the computer model developed. (Gholap 2007) Numerical Model Restricted element approach and suitable heat transfer correlations are integrated into the model to calculate the performance of the capillary tube-suction line heat exchanger. This model is of two modes: Design mode: to calculate the capillary tube length for the specified refrigerant flow rate, Simulate mode: to estimate the refrigerant flow rate for the particular tube length. . The finite-element The model comprises the operating surroundings of the refrigeration system, geometrical Parameters of the capillary tube-suction line heat exchanger and refrigerant properties. This capillary tube separated into three sections. Adiabatic inlet region (connecting the condenser), the heat exchange region and the adiabatic Outlet region (connecting the evaporator).refrigerant flow inside the capillary tube comprises of two regions: the single-phase region and the two-phase region. Numerical solution is conceded out and separating the flow domain into small essentials by the side of the capillary tube and the suction line. The length of each control volume model is 1 mm. Homogeneous flow theory analyzes the two-phase flow inside the capillary tube. The model is based on the conservation of mass, momentum and energy; these equations are solved at the same time all through an iterative process. Within the design, the mass flow rate is an input and the sum of total length of the capillary tube is an output, whilst in the replicate case, the capillary tube length is an input and the mass flow rate is an output, which is evaluated iterative process, The calculated length is compared among the given capillary tube total length, thus the supposed mass flow rate can be adjusted. (Yang, 2005) Enhanced tubes of condensers Air-cooled in addition to water-cooled condensers with in-tube condensation of refrigerants are extensively used in water chillers, air-conditioners .Trying to replicate the physics of the condensation procedure analysis on condensation of refrigerants believe to be the transition faced next to the air-conditioning and refrigeration industry in recent years, An introduction of latest ozone friendly refrigerants as substitute for CFCs and HCFCs. Condensation with horizontal tubes, the two point flow is conquered by vapour shear or gravity forces. At the same time annular flow pattern has high vapour shear, wavy and slug flows become visible when gravity is the controlling force. In refrigeration applications with halogenated working fluids, better tubes are frequently used in bundle condensation. Tubes with two-dimensional or three-dimensional external fins are used in few cases they can also be internally amplified to increase the water-side heat transfer coefficients, when fouling is not a problem Bundle condensation has investigated, for reliability in heat transfer. The use of geotropic mixtures combination with bundle condensation should be dejected as it can give rise to relevant refrigerant composition shift. (Cavallini A et al., 2003) Research question HOW TO HEAT OPTIMIZING TECHNIQUE AND EFFICIENCY IN HOUSEHOLD REFRIGERATOR SYSTEM? AIMS The study of the project proposal is based on optimizing heat exchangers in the house hold refrigerator systems. A multi-objective optimization procedure is implements and finding out optimal design which minimise energy consumption and material cost for the household refrigerator systems. The study considers various design of optimization of heat exchangers. Objective To research on properly designed heat exchanger that will help to decrease energy consumption. To carried out a literature review on reducing the energy consumption   refrigerator systems and also in low cost and increase the volume storage Research method Research method is a process of getting better knowledge and understanding of work from peoples those who previously experienced and in some of the research is to take action on previous peoples understanding (Marshall and Rossman, 1999). In a research data can be collected from two sources primary research and secondary research. The primary research is to conducting interviews. These interviews help get knowledge and data for the key research issues and also to get different views of peoples .according to (silverman, 2004) interviewing play a key role in getting an large amount data in quick time .lot of researches make use of interviews to get a clear structure .and in secondary research that data is collection by means of document, previous research, articles, publication and text book. For this research the secondary source has been used. Research design   Research design play a very important role in research to know the topic is researchable or not. The research design has to consider the three elements philosophical assumptions, specific research method and strategies of inquiry and also research question (John, 2009) .For this research. The first task is to find out the research topic which is related to the field and researchable. The choose topic was heat optimizing technique and efficiency in household refrigerator system. Because this topic related to the field and find interesting.After finding the topic the next task was to find literature reviews. After finding all the resource for the topic outline all the important points and start writing. Data collection Data collection involved collecting data by the source of primary and secondary. Collecting data involved in selecting data from different source and the techniques of data, that will collected for the purpose of final research (Silverman, 2004) according to (Sapsford, Roger and   Jupp, Victor;2006) Research doesnt involves in first hand data collection, but it can   also based on the made material available made by other peoples. In this assignment the secondary source has been used to collect data for the research and all the material in the net treated with caution because it can be false. Therefore the data has been collected from the source NORA which is available in Northumbria University and the other source is Northumbria library for referencing text book for this research. Data analysis Data analysis is a process of brining all the collected data and structure for the research. Overview of research Heat exchangers can have several design variables which are controlled by various reasons such as width, fin density, tube diameter, tube spacing, fin spacing, and so on. Energy-consumption and heat-exchanger which form a multi-objective optimization difficulty, Optimization was stopped after 50th generation ever since no additional development was observed. The explanation is divided into two regions.   Region one represent energy efficient and cost-efficient compared with the baseline design. Region two represents both energy and cost is better than for the baseline design. In the case of cost efficient solutions, condenser conductance stays close to its minimum value. For energy-efficient solutions, it stays close to its maximum value with an enhancement in the evaporator conductance thus; region two is most desired optimization. RESOURCES/CONSTRAINTS The mainly used resources need for a research is websites, journals and text books for getting the information and previous research papers and the constraints are Time management for the research Find the research work for writing a literature review. Access to the websites which is held by an engineering organisation. Finding books related to the research topic. Collecting data from different resources. For designing the software used is solid works 2010.

Class Conflict in Britain :: Politics Political

Class Conflict in Britain "Class conflict has gradually been diluted by growing affluence." "The history of all hitherto existing societies is the history of class struggle." This famous opening line from Marx Communist Manifesto refers to the struggle between the labouring, working classes and the bourgeoisie owners of the means of production. The proletariat are exploited by the capitalists for profit and are therefore forced to live in poverty and dire conditions. Marx predicted that eventually the proletariat would overthrow this capitalist system and replace it with a system which is often referred to as Communist - whereby the workers have control. Today, whenever the words 'class' or 'class conflict' are mentioned people usually turn to Marx definition and picture the poor worker fighting for better pay, better living and working conditions. The typical class conflict is typified as workers versus the owners, or bourgeoisie. In Britain this struggle did not develop in the way that Marx predicted - there has never been a genuine proletariat revolutionary threat. In its place has been a tradition of reformist socialism with the Labour Party and the Trades Unions being the main campaigners. In Britain the traditional class conflict is often depicted as Labour Party versus Conservative Party. The Labour Party have fought for workers rights and have been supported at elections by the working class, whereas the Conservatives have drawn most of their support from the middle classes. It is argued that today this traditional class conflict, depicted in no better fashion than the Miners' Strike of 1984, has been diluted by growing affluence. In otherwords the working class have become economically better off. They were given the right to buy council houses, to own shares and have, it is argued, become more middle class. The working class today have a lot more to lose in a fierce class struggle and are therefore happy to uphold the system. The huge decline in the traditional industries, such as coal, has coincided with a rise in the size of the non-manual, service industry - the sphere in which the 'middle classes' tend to be employed. In 1964 50% of the workforce were employed in the manual sector, compared to 36% in 1992. These figures coincide with a 15% rise in the non-manual, 'petty bourgeoisie' jobs. Whilst there may be some truth in this 'embourgeoisement' theory, there is also no doubting the fact that it is an exaggerated view. To say that 'we are all middle class' (Blair 1998) is an absurdity. Class conflict may have been subdued but not only because of growing affluence. The capitalists have managed to silence what was once a